" />

Physics calculations in motorcycle technology such as

1.  Engine Capacity
Capacity shown by the volume of the machine that formed at the piston moves upwards from the TMB to the TMA, also known as volume measures. Volume measures calculated in units of cc (cm3). The formula to calculate the
Volume step = area x length circular cylindrical steps

2. Volume Space Fuel

The volume of the fuel is the volume of the space formed between the cylinder head and piston head reaches TMA. Denoted by Vc (Volume compressi)

3. Cylinder Volume

Volume of the cylinder is the sum total of the increase of the volume of step with the engine volume.

The formula is: Vs = Vl + Vc

Description:

Vs = Volume of cylinder (cc)

Vl = Volume step (cc)

Vc = Volume of the engine (cc)

4. Compression Comparisons

Comparison of compression is the ratio of cylinder volume with the volume of the compression. Comparison of compression associated with the volume steps.

5. Fuel Efficiency and the Efficiency of Heat

Calorific value (heat) of fuel we need to know, so that heat balance of the motor can be made. Efficiency or not a motor works, reviewed on the basis of calorific value fuel. Calorific value associated with the severe type. In general, the higher the density the lower the value kalornya. Combustion can take place with perfect, but it can also not perfect.

Imperfect combustion may result in:

1. Heat losses in the motor becomes large, so the efficiency of the motor to be down, the business of the motor to fall also on the use of fuel remained.

2. Time-burning can cause the piston springs attached to the plot, so that he no longer functions as a spring piston.

3. Time-burning can also be attached to the drain between the valve and the holder, especially in the relief valve, so valve can not close the meeting.

4. Time arson that has become hard to stick between the piston and cylinder wall, blocking the lubrication, so that the piston and cylinder wear easily.

Fuel efficiency and heat efficiency is crucial for the efficiency of the motor itself. Each motor has a different efficiency.

One Response to “Physics calculations in motorcycle technology”

  1. I knew I was right. Me and my friend placed a bet about which article was superior. I thought your website was superior, but she believed this site on dirt bike apparel was better. We rounded up a couple of buddies who had not seen either site before to look them both over. Majority chose your website. I knew I was right all along :)

Leave a Reply